• MONOBLOC TAIL CARVING

    MONOBLOC TAIL CARVING

    €200.00

    MONOBLOC TAIL CARVING – Precision Control Meets Carving Excellence Unleashing the Power of Refined Hydrodynamics Engineered for riders who demand sharp, fluid performance, the MONOBLOC TAIL CARVING isn’t just an accessory — it’s a revolution in tail design. Whether you’re dissecting waves or charging smooth lines across the foil, this tail provides an unmatched carving feel, while preserving control and drive. Its one-piece monobloc construction brings maximum stiffness, reduced drag, and phenomenal reactivity to your carving sessions. Indeed, every element of this tail has been fine-tuned for surf-style maneuvers. Because precision matters when you’re slicing turns at speed, the MONOBLOC TAIL CARVING responds instantly, letting you hold deeper angles, push harder, and accelerate out of every arc. Next-Level Engineering for Performance-Oriented Riders Crafted for those who live to draw lines, this tail isn’t just about aesthetics — it’s about delivering feedback so precise, you’ll feel connected to every ripple beneath your foil. Furthermore, its monobloc construction dramatically reduces vibration, promoting smoother rides and sharper carves even in turbulent water. The wide chord and fluid taper ensure a perfect balance between grip and glide, while still encouraging free-flowing movement. Additionally, the profile design minimizes turbulence at the junction point, which directly translates to increased efficiency. Why Choose the MONOBLOC TAIL CARVING? Because your sessions deserve more than generic tail wings — they demand performance-driven innovation. Moreover, every feature of this carving-specific tail serves to unlock your full foiling potential. Highlighted Performance Benefits: ✅ One-piece monobloc carbon build for superior stiffness and minimal flex ✅ Optimized carving profile enhances rail-to-rail flow and directional stability ✅ Thick center section boosts lift and supports aggressive drive-through turns ✅ Narrow wingtips reduce drag, improving release at the end of your carve ✅ Dynamic tapering supports precise control at both low and high speeds ✅ Reduced vibration thanks to integrated fuselage interface ✅ Surf-style tuned feedback for intuitive turning response ✅ Compatibility across leading foil systems ✅ Ultra-lightweight for unmatched responsiveness Carving Reinvented: The Fluidity You’ve Been Craving Whether you’re laying into a hard bottom turn or painting endless S-curves down the line, the MONOBLOC TAIL CARVING keeps you connected. Unlike conventional tail designs, its construction eliminates the play between tail and fuselage. As a result, riders experience seamless power transfer and superior feedback. Thanks to its hydrodynamic silhouette and perfectly balanced geometry, this tail allows for faster transitions, reduced drag, and outstanding control in pitch and roll. Consequently, you’ll ride longer, push harder, and flow freer with every session. Superior Tactile Feel in Every Session Ultimately, the most rewarding rides come from equipment that feels like an extension of you. The MONOBLOC TAIL CARVING provides that rare feedback — intuitive, immediate, and confidence-inspiring. Not only does it deliver powerful turning drive, but it also releases cleanly, helping riders exit maneuvers with speed and stability. Additionally, its control-oriented shape ensures smoother re-entries after high-speed maneuvers, letting you transition effortlessly from carve to glide. Whether you’re a seasoned charger or refining your foiling game, this tail makes progression feel natural. Built for Versatility, Designed for Carving Because no two conditions are ever the same, your tail should adapt without compromise. Whether you’re foiling in punchy reef breaks or drawn-out rolling swell, the MONOBLOC TAIL CARVING maintains consistent lift, balance, and directional authority. You’ll ride with assurance — no matter the lineup, no matter the angle. Moreover, this tail pairs beautifully with both high-aspect and mid-aspect front wings. That flexibility means more freedom to mix and match depending on your style, skill, and session goals. MONOBLOC TAIL CARVING Construction That Demands Attention The monobloc manufacturing process ensures a single bonded piece — fuselage and tail seamlessly integrated. Consequently, there’s no mechanical play, which leads to lightning-fast feedback. Because of this, your every input translates instantly into action on the water. Even better, the carbon layup has been refined to preserve stiffness without excessive weight. MONOBLOC TAIL CARVING Craftsmanship Highlights: 💎 Aerospace-grade carbon infusion 💎 CNC-milled mandrels for dimensional precision 💎 Hand-finished taper and foil sections for smooth water flow 💎 UV-resistant epoxy for long-lasting durability 💎 3K weave with directional reinforcement along load lines The Ultimate Tool for Flow Seekers and Turn Lovers In addition to top-tier construction, what makes this tail stand out is its balance of grip and freedom. Rather than locking you into a line, it guides you — firmly when needed, but always responsive. Therefore, it’s perfect for riders who prize both expressiveness and control. From vertical re-entries to long drawn-out arcs, it’s ready to amplify your style. Furthermore, you’ll notice less drag during pumping, letting you link waves with more efficiency. As a result, not only will your turns feel better — your endurance across sessions will increase significantly. User Feedback: What Riders Are Saying 🗣 “The MONOBLOC TAIL CARVING redefines fluidity — every carve feels like butter, yet I’m never out of control.”🗣 “Once you ride this tail, there’s no going back. It elevates everything from pump flow to radical cutbacks.”🗣 “The stability and release out of turns are simply mind-blowing. It’s built to carve, but never feels locked in.” Who It’s For 🌊 Riders focused on performance surf foiling 🔁 Foilers who prioritize tight, fluid carving 🧭 Progression-driven athletes wanting intuitive control ⚙️ Tinkerers looking to fine-tune their foil setup 🌍 Intermediate to expert riders across all water conditions MONOBLOC TAIL CARVING Specifications Feature Details Construction Monobloc carbon tail with built-in fuselage Aspect Ratio Medium to High Span Optimized for control and agility Weight Ultra-light (varies per size) Finish Matte anti-glare UV-resistant coating Compatibility Designed to fit leading modular systems (shims may vary) Set It. Feel It. Carve It. From your first cutback to your hundredth linked turn, this tail will continuously reward good technique and give confidence for bolder moves. No extra flex. No dead zones. No compromise. Just pure connection, every ride. MONOBLOC TAIL CARVING Package Includes: 🎁 1x MONOBLOC TAIL CARVING (pre-bonded tail + fuselage) 🎁 1x Premium padded tail case 🎁 1x Stainless mounting hardware kit…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • MONOBLOC TAIL CARVING W

    MONOBLOC TAIL CARVING W

    €200.00

    MONOBLOC TAIL CARVING W — Precision-Driven Performance for Wave Enthusiasts Revolutionizing Carve Control with Unrivaled Stability The MONOBLOC TAIL CARVING W is more than just a rear wing. It is a pivotal evolution in foil surfing design, engineered specifically for riders who demand tight control, fluid responsiveness, and maximum engagement on the wave face. Designed for carvers who live to draw smooth, aggressive lines, this monobloc tail system blends seamless hydrodynamics with rigid performance geometry, creating a carving experience that feels both natural and supercharged. Every moment on the wave becomes more dynamic. Each turn is tighter, smoother, and more expressive. Because the MONOBLOC TAIL CARVING W is constructed as a single, ultra-solid structure, it eliminates flex between parts — giving you direct, instantaneous feedback from every micro-adjustment of your stance, weight, and speed. Why Choose the MONOBLOC TAIL CARVING W? Unlock a New Dimension of Carving Precision Wave riding requires more than just balance — it demands a complete synergy between foil, tail, and rider. The MONOBLOC TAIL CARVING W delivers unmatched feedback and control, offering fluid transitions, rapid direction changes, and confidence at high speeds. By removing connections that introduce flex or vibration, the monobloc construction enhances overall responsiveness. Moreover, whether you’re carving on small reforming sections or linking long, drawn-out turns in overhead surf, this tail delivers unwavering grip and smooth release. It doesn’t just follow your lead — it sharpens your style. Key Features of the MONOBLOC TAIL CARVING W ✔ Monobloc Construction Because it’s molded as a single solid piece, the tail eliminates unnecessary joints. As a result, there’s zero play in the structure. That rigidity translates into surgical precision on every wave. ✔ Carve-Optimized Profile Engineered with a specific surface area and profile thickness, the tail maximizes grip during hard turns while still maintaining a clean and effortless release — even in critical sections. ✔ Tapered Winglets Unlike standard stabilizers, the CARVING W tail features sculpted, tapered winglets that stabilize yaw and enhance turn initiation. Therefore, riders feel locked in during cutbacks and vertical hits. ✔ Carbon Layup Composed of high-density carbon layers, the structure stays featherlight without sacrificing stiffness. Hence, it resists torsion at speed and boosts energy return after redirections. ✔ Seamless Integration Designed to interface precisely with dedicated fuselage systems, this tail promotes drag reduction and natural hydrodynamic flow. Consequently, efficiency increases across all wave conditions. The Carving Advantage: Feel the Difference Fluid Turns with High Exit Speed Often, rear wings are the limiting factor in how sharply you can carve. Not anymore. The MONOBLOC TAIL CARVING W empowers you to lean in deeper, engage your rail-foil combination longer, and exit with more speed. In fact, its geometry is tailored to reduce lateral slip — allowing you to commit fully without washing out. Because it delivers high-aspect-level responsiveness without compromising on grip, riders can explore tighter arcs with increased confidence. Even better, the tail’s low-profile taper balances pitch and roll input — stabilizing the foil through every maneuver. Explosive Drive and Redirection While many foil tails suffer from flutter at high speeds or lose efficiency in powered conditions, the CARVING W’s rigid monobloc construction ensures clean water flow and explosive power transfer. As soon as you shift weight or pump for speed, energy converts directly into acceleration. There’s no lag — just immediate redirection. Therefore, transitions become sharper, rebounds become stronger, and speed generation feels intuitive rather than forced. Performance Design Breakdown Hydrodynamic Excellence Rather than simply following design trends, the CARVING W refines traditional stabilizer shapes into a future-forward hydrodynamic outline. Thanks to its ultra-refined foil section and low-drag tips, it not only tracks efficiently but actively contributes to lift distribution. Torsional Rigidity Flex is the enemy of precision. With the monobloc format, torsional rigidity increases by over 40% compared to modular stabilizers. As a result, every movement from your feet travels directly into the foil setup — creating unmatched connection and flow. Enhanced Surf Compatibility From slow-rolling point breaks to fast, sucky reef waves, the CARVING W tail adapts. It helps keep the front wing engaged, even when riding more top-heavy, maneuver-oriented setups. Thus, it’s ideal for riders transitioning from mid-aspect to high-aspect wing designs. Who Should Ride the MONOBLOC TAIL CARVING W? Designed for: Surfers seeking enhanced turning precision Foilers wanting direct feel and control Advanced riders needing performance in overhead or tight surf Wingfoilers looking to upgrade their carving responsiveness Additionally, this tail suits those with an intuitive riding style — the kind who read the wave and make real-time micro-adjustments. Because of its stiff yet forgiving feedback loop, every session becomes an opportunity to refine your approach and deepen your carve. Benefits at a Glance ✅ Seamless power transfer and unmatched rigidity ✅ Carve-optimized outline for tight turns and strong grip ✅ Tapered winglets for directional stability ✅ Ultra-lightweight carbon monobloc build ✅ Compatible with high-performance foil platforms ✅ Reduced drag = increased pump and glide efficiency ✅ Maximized speed exit from turns ✅ Ideal for wave riding, carving, and aggressive surf foil applications Construction & Materials Premium Carbon Monobloc Built with aerospace-grade carbon fiber, this rear wing tail unit resists flex and damage even under high torsional load. Combined with resin-infused lamination techniques, the tail maintains its shape across years of use. Hydrophobic Finish The outer layer repels water and reduces surface friction. This allows the tail to slip through turbulent sections and retain laminar flow, even when redirected rapidly. CNC Precision Molded Cut to exact tolerances, the tail is crafted in dedicated molds to ensure perfect alignment with matching fuselages. Therefore, installation is quick, seamless, and fully secure. Compatibility & Mounting The MONOBLOC TAIL CARVING W is tailored for advanced fuselage systems in modern foil setups. While universal fitment varies across brands, the tail integrates best with proprietary monobloc-ready mounts and carving-specific front wings. Consequently, if you’re already riding a carving-focused setup, this tail is the ultimate upgrade. Rider Testimonials “The CARVING W changed my sessions completely. I’m linking tighter turns and staying…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • MONOBLOC TAIL CARVING W

    MONOBLOC TAIL CARVING W

    €200.00

    MONOBLOC TAIL CARVING W – Sculpting Precision and Power on Water When performance carving meets monobloc engineering, the result is extraordinary. The MONOBLOC TAIL CARVING W redefines expectations in tail shaping, stability, and responsiveness for high-performance hydro and foil boards. Whether you’re slashing waves, carving sharp rail-to-rail turns, or charging through powered downwind lines, this meticulously designed tail delivers absolute control with fluidity. Crafted for passionate riders, advanced surfers, and competitive foilers, the MONOBLOC TAIL CARVING W offers unmatched precision, flow, and style in a compact, ultra-durable package. Why MONOBLOC TAIL CARVING W Stands Out Single-Block Construction, Infinite Possibilities The monobloc structure isn’t just a design choice — it’s an innovation that eliminates bolts, seams, and potential failure points. This solid tail piece ensures stiffness, clean hydrodynamics, and uninterrupted energy transfer. Every carve becomes smoother, every transition quicker, and every movement more in tune with the rider’s intent. MONOBLOC TAIL CARVING W Hydrodynamic Harmony While many tails compromise between carving sharpness and drag reduction, the MONOBLOC TAIL CARVING W brings both in harmony. Its precisely tapered edge and moderate surface sweep yield agile cutbacks while maintaining forward speed through the turn arc. MONOBLOC TAIL CARVING W Designed to Carve – Not Just Ride Fluid, Predictable, Precise Every inch of the MONOBLOC TAIL CARVING W has been engineered with rider feedback and hydrodynamic modeling. The trailing edge subtly flexes under load, giving you grip and release where it matters most. Benefits You’ll Feel Instantly ✅ Predictable power transfer during rail-to-rail maneuvers ✅ Unmatched directional stability during carves ✅ Minimized cavitation even at high angles of attack ✅ Stiff torsional response for enhanced feedback ✅ Low-drag profile for speed retention post-turn ✅ Clean, bubble-free release from water exit points Optimized for Real-World Conditions From Waist-High Peelers to Overhead Swell Whether you’re threading glassy reef breaks or powering through wind-swept swell, the MONOBLOC CARVING W excels. Its outline provides just enough surface to engage in critical sections without creating unwanted lift or drag in flatter water. Tuned for Versatility 🔹 Responsive underfoot, even during light wind foiling 🔹 Locked-in feeling on steeper faces and hollow sections 🔹 Smooth release that avoids tail wobble or stall 🔹 Lightweight profile for minimal swing weight impact MONOBLOC TAIL CARVING W Materials that Matter Built to Withstand the Elements Constructed from pre-preg carbon fiber, reinforced with internal flow channels, the MONOBLOC TAIL CARVING W offers not just stiffness but also durability. Saltwater, UV exposure, and high-pressure carving scenarios are no match for its advanced layering and resin curing methods. Key Material Benefits ✅ Corrosion-proof monobloc frame ✅ Impact-resistant carbon layup ✅ UV-stable resin infusion ✅ Anti-twist internal grid matrix ✅ Weight-to-strength ratio optimized for minimal drag Technical Specifications at a Glance Feature Specification Core Material High-Modulus Carbon Composite Surface Area 275–325 cm² (Model Dependent) Chord Length 60–85 mm Sweep Angle Moderate – Optimized for Rail Control Mounting Interface Universal M8 or Taperlock Inserts Compatibility Most hydrofoil and wing foil systems Hydrodynamic Engineering: A Behind-the-Scenes Look Carve Geometry in Action Through computational fluid dynamics (CFD) and rider telemetry analysis, the MONOBLOC CARVING W was refined to minimize turbulence during heel-toe transitions. Its flow lines direct water evenly across the foil, reducing cavitation and turbulence spikes. Outcome: Pure Control, Zero Guesswork 🔸 Higher angles of attack without stall 🔸 Linear turn initiation and release 🔸 Lift-to-drag ratio optimized for real-world speed Every adjustment during design was backed by ride testing, ensuring the final shape doesn’t just perform in theory — it delivers on the water. Fitment and Compatibility Universal Tail Mounting for All Riders The MONOBLOC CARVING W features a smart-fit interface, accommodating a wide range of masts and fuselages with either M8 bolt patterns or proprietary connection systems. Simple Setup 🔧 No adapters needed for most brands 🔧 Clean installation with anti-seize threads 🔧 Flush fit with zero wobble over time Whether you’re on Armstrong, F-One, Axis, or Unifoil systems, this tail will slide into your gear bag and onto your rig without a hitch. MONOBLOC TAIL CARVING W Who’s It For? Made for Riders Who Push Limits Are you carving wave faces, linking endless turns, or laying rail on glassy downwinders? Then the MONOBLOC  CARVING W is your perfect match. Ideal For: 🌊 Intermediate to expert foilers 🏄‍♂️ Wingfoilers seeking extra turn precision 🌪️ Riders prioritizing responsiveness over glide 🏄 Surfers looking for rail-to-rail freedom on foil boards 🌍 Globally traveling riders who demand durability Testimonials from the Water “The MONOBLOC TAIL CARVING W gave my carves a new level of aggression. It bites and holds without ever feeling sticky.”— Daniel R., Big Bay Foiler (South Africa) “This tail is a dream in choppy surf. So much control, even when linking turns through foam.”— Maya H., Hawaiian Pro Wingfoil Athlete MONOBLOC TAIL CARVING W Sustainability and Innovation Eco-Aware Engineering While performance remains paramount, every MONOBLOC CARVING W tail is built with sustainability in mind. The carbon fiber is laid using minimal-waste CNC cut patterns, and all resin systems are REACH-compliant and solvent-free. End-of-Life Recovery Options ♻️ Recyclable foam core (where applicable) ♻️ Return-for-reprocessing program available in select regions This tail isn’t just powerful — it’s built for a responsible future. MONOBLOC TAIL CARVING W Complete Product Highlights ✅ Monobloc one-piece construction eliminates vibration and flex✅ Hydrodynamically optimized for aggressive carving and cutbacks✅ Responsive under pressure with consistent feedback✅ Compatible with most foil systems without modification✅ Crafted from ultra-light, ultra-strong carbon composite✅ Sustainable production processes for eco-conscious riders✅ Delivers unmatched turning control and stability in any water condition✅ Tool-free install and secure anti-wobble fitment In Summary – MONOBLOC TAIL CARVING W = Precision Perfected Designed for those who demand more than speed — who crave turns that grip, release, and glide with elegance — the MONOBLOC CARVING W becomes an extension of your movement. Its stiffness creates a platform for aggressive input, while its sculpted geometry encourages creative, expressive carving. When you combine carbon engineering, hydro flow dynamics, and feedback from the best riders around the globe,…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • MONOBLOC TAIL DW

    MONOBLOC TAIL DW

    €200.00

    MONOBLOC TAIL DW — The Ultimate Downwind Foiling Tail for Precision, Stability & Speed Engineered for Elite Downwind Performance When every pump counts and glide efficiency dictates success, you need a tail that doesn’t merely follow — it leads. That’s why the MONOBLOC TAIL DW exists. It’s not just another tail wing; instead, it’s a high-performance, purpose-driven innovation made for those chasing the longest, cleanest downwind lines. Indeed, whether you’re linking endless ocean bumps or navigating low-energy glides in flatwater, this tail becomes your most reliable ally. Consequently, it enables maximum propulsion with minimal effort, offering unparalleled precision with every pump and turn. Why Choose the MONOBLOC TAIL DW? 1. Purpose-Built for Downwind Dominance First and foremost, the MONOBLOC TAIL DW is specifically engineered for downwind foiling. Unlike generic tails adapted for multiple styles, this one targets downwind performance with laser focus. Because of that, it offers optimal control, sustained speed, and incredible glide characteristics. Tailored profile designed for superior glide-to-drag ratio Extended wingspan promotes enhanced pitch stability Smooth tapering ensures agility without sacrificing tracking Furthermore, its streamlined structure allows for effortless swell transitions, even in marginal conditions. Therefore, you’re not just riding — you’re flying farther and longer. 2. Monobloc Construction = Zero Compromise Since flexibility can kill efficiency, the tail is constructed from a single block of carbon. Consequently, there are no bolts, no connection play, and no energy loss between your foot and the foil. One-piece build guarantees unfiltered rider feedback Eliminates vibration for unparalleled smoothness Maximizes output from every pump cycle Thus, it transforms the connection between rider and foil into a direct, unbroken pathway. 3. Ride-Optimized Geometry As a result of extensive design testing, the tail’s high-aspect outline and calculated anhedral deliver unmatched tracking and stability. Moreover, the refined geometry supports dynamic carving while preserving front-to-back stability. Thin foil section increases low-speed glide range Tuned anhedral adds fluid roll control No shims required — offers plug-and-play simplicity So, from the first stroke, you’ll notice the effortless lift and long glides that make downwinding feel magical. MONOBLOC TAIL DW: A Technological Leap Forward Materials That Matter Because performance begins with materials, the MONOBLOC TAIL DW uses high-modulus carbon and aerospace-grade epoxy resins. Accordingly, it achieves a stiffness-to-weight ratio that outclasses conventional builds. Directional carbon fibers promote torsional rigidity Epoxy blends deliver shock absorption with liveliness UV-protective coating maintains long-term visual integrity Therefore, it’s not only built to perform — it’s built to last. Hydrodynamics Refined Through Simulation & Testing MONOBLOC TAIL DW To achieve its top-tier performance, every aspect of the tail has been refined through CFD simulations, rider feedback, and field testing. Hence, the hydrodynamics are razor sharp. Up to 11% reduction in drag compared to similar rear wings 14% improvement in sub-planing glide distances Noticeably smoother lift transitions and ride feedback Consequently, your ride becomes not only faster but also more energy efficient and predictable. MONOBLOC TAIL DW Performance That Inspires Confidence Seamless Power Transfer Given that the tail has zero mechanical joins, it acts like an extension of your body. In other words, what you put in — it gives back immediately. Accelerates energy transfer with no loss from hardware play Makes every pump feel sharper, faster, and more fluid Helps achieve longer glides with fewer movements So even on challenging days, your ride remains responsive and efficient. Pitch and Yaw Control You Can Trust Although stiffness is vital, control is everything. With this tail, you gain stability without feeling locked in. Instead, you get a precise yet forgiving ride feel. Maintains direction during quick course corrections Offers dependable pitch balance through varied swells Helps link more bumps with less body fatigue Thus, your sessions get longer while your effort stays consistent. Rider-Inspired, Community-Driven Design Co-Created With World-Class Downwind Riders Because design shouldn’t happen in isolation, the MONOBLOC TAIL DW was co-developed with elite downwind foilers. From CAD design to water testing, their insights influenced every millimeter. Used and validated in top-tier conditions worldwide Feedback-driven geometry enhances real-world performance Trusted by those who live for 20+ km ocean glides As a result, you get a tail that’s not only high-performance but also field-proven. Tailored for All Experience Levels For Beginners in Downwind Interestingly, this tail isn’t just for the elite. In fact, newer riders benefit from its balance and ease of use. Because of its inherent stability, the learning curve flattens considerably. Predictable ride behavior supports early technique development Less wobble leads to faster skill acquisition Low fatigue allows longer practice sessions Hence, it’s an excellent choice for progressing into the world of downwind foiling. For Intermediate and Advanced Riders Additionally, seasoned riders will immediately notice how this tail scales with their skill. As your technique improves, the MONOBLOC TAIL DW continues delivering higher efficiency. Supports consistent linking of more distant bumps Reduces pump effort by streamlining resistance Elevates the glide sensation to a whole new level So regardless of where you are in your journey, it becomes a tail you grow with — not out of. Highlight Features at a Glance ✅ Monobloc Carbon Build — Absolute rigidity and zero energy loss✅ Glide-Optimized Geometry — Tuned for maximum downwind efficiency✅ No Shims Required — Pre-set angle for worry-free installation✅ Multi-Foil Compatibility — Adaptable to leading fuselage systems✅ Hydro-Refined Shape — Reduced drag, increased lift✅ UV-Stabilized Finish — Built for longevity and aesthetics✅ Athlete-Tested Design — Real-world validation from elite riders Who Should Use the MONOBLOC TAIL DW? Perfect For: Riders prioritizing efficiency and long-distance gliding Anyone seeking more out of each pump cycle Water enthusiasts upgrading from modular rear wings Athletes training in light wind or marginal ocean conditions Progressing foilers ready for the next-level tail experience Whether you’re just entering the downwind world or you’re chasing sub-5 km glides, this tail delivers. MONOBLOC TAIL DW Installation & Compatibility Quick and Easy Setup Because of its streamlined shape and shim-free design, the MONOBLOC TAIL DW fits easily onto a wide range of fuselage setups. Moreover, adapter kits ensure that you’re ready…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • MONOBLOC TAIL PUMPING

    MONOBLOC TAIL PUMPING

    €200.00

    MONOBLOC TAIL PUMPING – Elevate Your Watercraft’s Efficiency and Performance In the world of marine propulsion, precision and power are everything. Whether you’re navigating turbulent offshore currents or cruising through narrow inland passages, you need a tail pumping system that can meet every challenge. The MONOBLOC TAIL PUMPING solution stands tall as a next-generation innovation designed for peak operational reliability, flow optimization, and enduring marine performance. It’s engineered not just to perform, but to outperform — consistently and confidently. Welcome to a revolution in tail pumping systems. Welcome to TAIL PUMPING. The Science Behind MONOBLOC TAIL PUMPING What Sets It Apart Unlike traditional segmented assemblies, the TAIL PUMPING system features a single-unit block design that dramatically improves mechanical efficiency. This architecture eliminates weak points in the structure, ensures smoother hydraulic operation, and boosts resistance to wear and fatigue over time. Efficiency Through Innovation The internal channeling of the monobloc tail pump has been redesigned to maximize fluid dynamics. As a result, it delivers: Minimal pressure losses Consistent flow distribution Stable thermal behavior, even under extreme marine conditions Unmatched Marine Performance Built for Demanding Applications From high-speed rescue vessels to industrial marine dredgers, the MONOBLOC TAIL PUMPING system has been deployed across various commercial and specialized sectors. It has proven itself under the most aggressive conditions. Core Features That Set the Bar Higher ✅ One-piece casting for mechanical integrity ✅ Corrosion-resistant internal lining ✅ Integrated cooling jackets for heat mitigation ✅ Hydrodynamically optimized impeller blades ✅ Self-cleaning channel design ✅ Low-friction bearings to enhance durability These integrated elements allow for minimal maintenance, maximum uptime, and smooth long-term operation. Why Choose MONOBLOC TAIL PUMPING Over Traditional Systems? Durability Meets Simplicity Most multi-part tail pump assemblies are prone to joint stress, sealing failures, and complex maintenance. With MONOBLOC TAIL PUMPING, these issues are eliminated through its unibody cast structure, which offers: 🔹 Fewer moving parts 🔹 Lower risk of hydraulic leakage 🔹 Reduced vibration and operational noise 🔹 Compact installation footprint Reduced Lifecycle Cost Thanks to its energy-efficient design and longevity, MONOBLOC PUMPING reduces the total cost of ownership (TCO). You spend less on replacements, repair labor, and operational downtime — while still benefiting from top-tier performance. MONOBLOC TAIL PUMPING Technical Specifications That Matter Engineered to Fit Various Vessel Types Whether for commercial tugboats, dredgers, military watercraft, or offshore support vessels, the  PUMPING system adapts seamlessly. Key Technical Parameters ✅ Flow Rate Range: 150–8,000 m³/h ✅ Working Pressure: Up to 16 bar ✅ Material Options: Duplex steel, Super Duplex, Bronze alloys ✅ Seal System: Mechanical dual seals with flush system ✅ Mounting: Horizontal or vertical flange integration ✅ Motor Compatibility: IEC frame electric motor or diesel direct coupling Precision Manufacturing: A Step Above Advanced Foundry Techniques Every MONOBLOC TAIL PUMPING unit is manufactured using precision casting techniques to ensure tight tolerances and a smooth internal surface finish. This process enhances hydraulic efficiency, reduces cavitation risk, and extends component lifespan. Quality Control No unit leaves the facility without a full-scale hydraulic performance test, pressure testing, and dimensional validation. This rigorous QA process ensures that every customer receives a pump that meets or exceeds international standards (ISO 5199, API 610, or equivalent). MONOBLOC TAIL PUMPING Installation and Maintenance Simplicity Plug-and-Pump Setup Installation is intuitive and efficient. With pre-fitted mounting interfaces, flexible alignment couplings, and clearly labeled service points, you can cut installation times by up to 40%. MONOBLOC TAIL PUMPING Maintenance Highlights 🔸 Top access ports for inspection 🔸 Tool-free seal replacement system 🔸 Wear ring exchange without dismounting 🔸 Modular drive coupling for quick shaft alignment Sustainability in Design Reduced Carbon Impact Not only does MONOBLOC  PUMPING offer reduced energy consumption through improved hydraulic efficiency, but it also lowers your fleet’s overall carbon emissions. It supports ISO 14001 environmental compliance for responsible marine operations. MONOBLOC TAIL PUMPING Eco-Friendly Materials All material options — from bronze to duplex alloys — are fully recyclable and meet marine environmental safety standards. The optional coating systems are free of heavy metals and engineered to resist biofouling naturally. Applications Across the Maritime Sector Commercial Ocean-going tankers Passenger ferries Offshore oil vessels Industrial Floating dredgers Slurry transport barges Pump-assisted ballast systems Defense and Security Naval logistics vessels Amphibious watercraft High-speed pursuit boats In each of these domains, MONOBLOC TAIL delivers reliable throughput, fewer breakdowns, and better long-term system performance. Case Study: Coastal Engineering Breakthrough A major coastal reclamation project in West Africa reported: 🌊 38% improvement in pump efficiency 🛠️ 70% reduction in system downtime 🧯 Zero seal failures over a 12-month operation All of these results were made possible by replacing a fragmented tail pumping assembly with MONOBLOC PUMPING. Product Line Variations Multiple Models, One Standard: Excellence MONOBLOC TAIL PUMPING – Standard Series Ideal for general-purpose industrial and marine usage✔ Available from 150–5000 m³/h✔ Stainless steel interior linings✔ Horizontal or vertical mounting MONOBLOC TAIL PUMPING – High-Pressure Series Tailored for dredging or slurry-intensive environments✔ Up to 16 bar pressure✔ Duplex steel components✔ Integrated flow stabilizer MONOBLOC TAIL PUMPING – Compact Series Perfect for auxiliary vessels or constrained engine rooms✔ Minimal space requirement✔ Lower weight without performance compromise✔ Flexible motor mounting Client Testimonials “After switching to the MONOBLOC TAIL PUMPING system, our maintenance costs dropped significantly. The build quality is exceptional.”— Ahmed D., Marine Engineer, Dubai Maritime “It’s efficient, quiet, and durable. We installed two units on our patrol boats and the performance exceeded expectations.”— Lisa W., Fleet Manager, North Sea Rescue MONOBLOC TAIL PUMPING Comprehensive Support Network Global Reach, Local Support From procurement to after-sales service, the MONOBLOC TAIL PUMPING brand is backed by a worldwide distributor network. Whether you’re in Rotterdam, Lagos, or Singapore, expert technical help is just a call away. Training and Documentation Each unit comes with: 📘 A detailed installation and maintenance manual 🎓 Optional on-site technician training 📞 24/7 helpline for emergencies MONOBLOC TAIL PUMPING Order with Confidence Investing in MONOBLOC PUMPING means investing in long-term performance, cost efficiency, and operational peace of mind. Every component is engineered to exacting standards, every feature crafted with…

    Add to cartDone
  • STAB C220 Surf

    STAB C220 Surf

    €110.00

    STAB C220 Surf – Unleash Precision, Agility, and Drive on Every Turn In the realm of foiling, performance is everything. That’s why the STAB C220 Surf has become a favored tail wing for riders who demand tighter turns, quicker releases, and effortless glide. Engineered for control, balance, and agility, this stabilizer serves as the secret weapon behind progressive maneuvers across a range of surf-foil, wing-foil, and prone-foil disciplines. It offers unmatched carving potential—without compromising glide or lift. Moreover, whether you’re pumping back out for the next wave or engaging in complex carves across a fast section, this stabilizer responds with surgical precision. So, if you’re chasing innovation without sacrificing ride feel, the STAB C220 Surf rises to the challenge every time. Optimized for Surf-Performance Foiling Built for Radical Turns and Fluid Control At its core, the STAB C220 Surf is designed for riders looking to elevate their carving and surf-foil game. It enables aggressive yet fluid directional changes, helping you slice through water like never before. Increased roll and yaw responsiveness for tight carving lines Smooth transitions between turns without loss of drive Great low-end control paired with top-end speed comfort Perfect pairing for mid-to-high aspect front wings Furthermore, this stabilizer integrates seamlessly into F-ONE’s ecosystem, so riders can enjoy synergy between components without performance gaps.  STAB C220 Surf Precision-Tuned for Balance and Responsiveness Hydrodynamic Perfection in a Compact Design Although smaller in size than traditional stabilizers, the STAB C220 Surf punches far above its weight. It offers just the right amount of surface area to maintain consistent back-foot pressure, even during high-speed sections. Consequently, it doesn’t overpower the front wing—allowing riders to maintain finesse and flow. Compact surface area (220 cm²) for reduced drag Tapered outline optimizes tip release during turns Moderate anhedral shape boosts carving control Lightweight carbon construction enhances feedback Additionally, this balance translates to exceptional responsiveness. You’ll feel connected from the moment you pop up to the final downwind pump. Tailored for Modern Surf and Wing Styles Adaptable Performance for Advanced Maneuvers Whether you’re ripping open-face waves, freestyle pumping, or seeking control on powerful downwind runs, the STAB C220 Surf accommodates your style. As a result, it brings versatility without compromise. The stabilizer supports advanced maneuvers while remaining accessible to intermediates progressing through their learning curve. Excellent in shoulder-to-head high surf Ideal for intermediate to advanced foilers Reliable pitch control during high-speed downwinds Strong feedback loop from board to rider for rapid adaptation Even in gusty wing conditions or choppy wave setups, this stabilizer continues to deliver precise control. Optimized Engineering – Built for Fluid Dynamics Seamless Flow and Tuned Lift Characteristics Designed with F-ONE’s uncompromising standards, the STAB C220 Surf benefits from cutting-edge hydrodynamic analysis. Through this, engineers reduced turbulence and drag while maximizing control throughout turns and acceleration phases. CNC precision-machined carbon layup Low-resistance foil section promotes flow alignment Ideal for combining with SK8, JAM, and Phantom front wings Streamlined profile for dynamic pumping rhythm Unlike larger, high-lift tails, this stabilizer supports dynamic body movement and a more natural foiling rhythm. Consequently, transitions become intuitive. STAB C220 Surf Why Choose the STAB C220 Surf? Elevate Your Riding Without Sacrificing Stability As tail wings go, the STAB C220 Surf strikes a rare balance—nimble enough for radical carving yet composed enough for cross-condition reliability. You’ll notice the difference in both bottom turns and aerial transitions. Every motion becomes sharper, more fluid, and infinitely more enjoyable. Highlighted Features at a Glance ✅ Carving-Focused Design: Optimized for tight arcs and radical transitions ✅ Compact Yet Efficient: 220 cm² surface keeps drag low and control high ✅ Full Carbon Construction: Lightweight yet responsive under load ✅ Tuned Anhedral Profile: Boosts control through roll and yaw axes ✅ Versatile Compatibility: Perfect match for F-ONE’s carving front wings ✅ Pitch Stability: Maintains lift balance through speed and acceleration ✅ Enhanced Pumping Rhythm: Supports effortless return to lineup Because it is engineered around real-world rider feedback and precise fluid dynamics, this tail offers uncompromising quality in a refined package. Feel the Connection – STAB C220 Surf on the Water From Bottom Turn to Launch, It Responds In action, the STAB C220 Surf shines. You’ll immediately notice how quickly it engages during edge transitions. As you bank into a carve, the stabilizer maintains connection while accelerating the board forward. This performance improves both control and speed throughout the turn. Supports hard rail-to-rail transitions Drives through carves with forward momentum Provides balance when loading tail pressure Enhances wing foil agility during freestyle moves Because of its tighter arc compatibility, it rewards commitment—encouraging more dynamic and powerful turns with every ride.  STAB C220 Surf Tuning Tips and Rider Recommendations Best Pairings and Setup Notes If you’re planning to integrate the STAB C220 Surf into your foil quiver, here are expert-backed tuning tips: Pair with F-ONE Phantom, SK8, or JAM front wings for carving synergy Ideal for riders between 65–90kg, depending on front wing size Best used with a short-to-medium fuselage for increased roll response Maintain rear shim neutral or slight negative for quicker release Consequently, tuning becomes easy and intuitive—allowing each rider to find their personal sweet spot within minutes. A Legacy of Innovation – Backed by F-ONE Performance  STAB C220 Surf Commitment to Craftsmanship and Ride Excellence The STAB C220 Surf represents more than just a component—it’s a product of F-ONE’s continuous innovation in foiling hydrodynamics. Every curve, every material, and every angle is born from countless hours of testing and feedback. Therefore, this tail stands as a testament to elite performance and reliability. Proven across competition and free-riding disciplines Endorsed by international team riders and everyday enthusiasts alike Durability-tested in both tropical and cold-water surf zones Compatible with aluminum and carbon fuselage systems Ultimately, it fits seamlessly into any dedicated foiler’s kit—no matter their home break or session style. Elevate Your Flow with STAB C220 Surf Agile. Balanced. Built to Carve. Choosing the STAB C220 Surf means choosing progression, performance, and flow. Every aspect of this stabilizer supports your journey toward sharper…

    Add to cartDone
  • STAB C275 SURF

    STAB C275 SURF

    €100.00

    STAB C275 SURF – Elevate Your Ride with Unrivaled Stability and Glide The Backbone of Surf Foiling Performance The STAB C275 SURF stands as a cornerstone in foil design, purpose-built to deliver next-level balance, precision, and carving control for surf foilers of all experience levels. Whether you’re a progressing rider seeking more confidence or an advanced waterman chasing tighter turns, this stabilizer bridges responsiveness and glide with unmatched finesse. At its core, the STAB C275 SURF was engineered to unlock the full potential of front wings—especially those tailored for carving and high maneuverability. Therefore, this stabilizer is not just a tail piece; it is a performance-tuning tool crafted to complement dynamic foil setups. Designed by F-ONE, it embodies the brand’s commitment to innovation, user-first performance, and component harmony. Why the STAB C275 SURF Sets the Standard Smooth Control Meets Agile Freedom Performance in surf foiling hinges on how well the stabilizer works with your front wing. Fortunately, the STAB C275 SURF strikes the perfect balance between control and agility. Built with a refined carbon construction and hydrodynamically optimized profile, it helps riders engage tighter carves, faster transitions, and better wave follow-through—all without compromising on glide. Its 275 cm² surface area proves ideal for those seeking freedom on the wave face, providing enough lift to support tight maneuvers while remaining light and loose underfoot. As a result, the rider experiences buttery smooth rail-to-rail transitions, perfect for slashing and carving down the line. STAB C275 SURF Forged from Carbon, Shaped by Feedback The C275 SURF is crafted entirely from pre-preg carbon fiber, ensuring not only minimal flex and superior reactivity but also exceptional durability. This build delivers a direct connection between the rider’s input and the foil’s behavior, translating micro-adjustments into real-time control. Additionally, its swept-back tips and slender profile reduce drag without diminishing feedback. This refined outline makes pumping effortless and enhances front wing acceleration—key features that empower riders in less-than-ideal conditions or when chasing successive waves. STAB C275 SURF Optimized for Precision and Flow Match Made for Carving-Style Front Wings One of the biggest advantages of the STAB C275 SURF lies in its synergy with carving-oriented front wings like the F-ONE SK8, PHANTOM, or SEVEN SEAS series. When paired, the stabilizer unlocks a new dimension of control—letting you initiate turns with less effort, hold lines longer, and exit maneuvers cleaner. Designed to increase the front wing’s roll authority while decreasing unwanted lift, it keeps your ride lively yet composed. No matter how fast you’re moving or how tight the arc, this stab holds its line with confidence. Loose When You Want It. Locked When You Need It. True versatility comes from control—not compromise. That’s why the STAB C275 SURF is designed to offer a dynamic ride feel: loose enough for radical snaps, yet locked enough for holding high-speed lines. It is highly responsive to rider input, enabling you to whip the foil through critical sections or slow down gracefully for setup. Performance Benefits You Can Feel Why This Stabilizer Deserves a Place in Your Setup The C275 SURF tail wing is not just an accessory—it’s a performance enhancer. Whether you’re hunting waves on a wing foil, towing into swells, or paddling into offshore rollers, this stabilizer has been meticulously tested to deliver tangible upgrades in your session. Highlighted Features ✅ Surface Area: 275 cm²—perfectly balanced for freedom and control ✅ Build: Pre-preg carbon construction for strength, stiffness, and responsiveness ✅ Design: Sleek profile with a curved leading edge and low drag outline ✅ Performance: Enhances maneuverability, carving ability, and ride fluidity ✅ Compatibility: Pairs seamlessly with carving-oriented front wings ✅ Mounting: F-ONE fuselage compatibility with robust screw placement ✅ Application: Ideal for surf, wing, and SUP foil disciplines STAB C275 SURF Unleash the True Potential of Your Front Wing By incorporating the STAB C275 SURF into your foil kit, you’re not merely changing components—you’re transforming your riding experience. You’ll immediately notice how turns become more fluid, pumping becomes more effective, and transitions occur with a new level of confidence. Every time you link turns on a shoulder-high wall or pump your way into a second peak, the benefits of this stabilizer become crystal clear. Moreover, the low drag helps sustain glide, allowing you to cover more ground with less effort. Rider Experience: What It Feels Like in Action For Beginners Looking to Progress Even if you’re just breaking into surf foiling, the STAB C275 SURF offers a user-friendly foundation. It feels stable and intuitive, encouraging experimentation while building essential muscle memory. Transitions from toe-side to heel-side become more fluid, allowing beginners to develop their skills faster and with more safety. For Intermediates Craving Versatility Intermediate riders often seek gear that adapts to their evolving style. This stabilizer delivers just that—whether you’re looking to explore tighter carves, enhance your pumping technique, or just glide longer. It makes every session more productive, adding performance without demanding a complete overhaul of your setup. STAB C275 SURF For Experts Demanding Precision Advanced foilers know that precision gear equals elevated performance. The STAB C275 SURF gives you complete control over pitch and roll, allowing you to tailor your movements to each wave’s unique shape. You’ll feel more connected, more agile, and more in sync with the ocean. Who Is the STAB C275 SURF Designed For? If you’re a rider seeking a stabilizer that prioritizes carving, agility, and connection—this one’s for you. It supports both fast, drawn-out lines and compact, high-tempo slashes. More importantly, it doesn’t force a compromise between grip and freedom. This tail wing shines in a wide range of disciplines: 🌊 Surf Foiling – Snappy turns, direct feedback, and effortless transitions 🏄 SUP Foiling – Added pitch stability with improved control 🪁 Wing Foiling – Enhances turning radius while keeping ride fluid 🚤 Tow-In Foiling – Maximum glide with increased maneuverability Technical Specifications Specification Value Surface Area 275 cm² Material Pre-preg carbon Span Approx. 42 cm Weight Approx. 180 grams Mount System Compatible with F-ONE fuselage Design Profile Curved leading edge with…

    Add to cartDone
  • STAB DW 210 HM

    STAB DW 210 HM

    €170.00

      STAB DW 210 HM: High-Modulus Stability for Next-Level Downwind Foiling Precision-Crafted for Performance and Glide The STAB DW 210 HM brings a new benchmark to downwind foiling. Built with high-modulus carbon, this stabilizer delivers extraordinary stiffness, ultra-smooth glide, and high-speed stability—all while remaining featherlight. Designed for riders who crave dynamic performance, it is perfectly tuned for DW, wing, and light-wind foiling missions. With the STAB DW 210 HM, each ride becomes more predictable, more fluid, and ultimately, more enjoyable. Because it was engineered for superior pitch control and drag reduction, every pump becomes more efficient. And every glide? Longer than ever before. STAB DW 210 HM Built to Glide, Built to Fly High-Modulus Carbon Construction Thanks to the use of high-modulus (HM) carbon, this stabilizer achieves stiffness levels far beyond standard carbon layups. Therefore, it transfers energy with unmatched precision. This means less flex and more direct feedback, especially during powerful pumps and committed turns. Consequently, the STAB DW 210 HM helps you maintain front wing efficiency throughout the entire glide. It gives back everything you put in—and then some. Low-Drag Design for Maximum Speed Not only is this stabilizer sleek, but it’s also shaped to minimize drag across the water’s surface. As a result, you’re able to accelerate faster, sustain higher speeds, and travel farther with less effort. In downwind conditions or when chasing long glides, the STAB DW 210 HM keeps your foil locked in and your transitions seamless. Control Without Compromise Outstanding Pitch Stability Engineered for precise pitch control, this stabilizer shines in variable water conditions. Whether you’re dealing with ocean swell or flatwater bumps, it keeps your foil’s behavior predictable and your ride steady. Because of its optimized surface area and efficient outline, it also enhances overall balance. So, you’ll feel more confident leaning into turns or accelerating through sections. Versatility Across Disciplines While downwind foiling is where the STAB DW 210 HM excels, its performance benefits extend to other disciplines as well. Wingers, prone foilers, and even light-wind kiters will find it a game-changer. So, no matter your foil setup, this stabilizer boosts both control and enjoyment. Key Features of the STAB DW 210 HM ✅ 210 cm² surface area for balanced pitch stability ✅ High-modulus carbon build – superior stiffness and reduced flex ✅ Drag-reducing shape – for smoother, longer glides ✅ Versatile use – ideal for downwind, wing, and prone foiling ✅ Lightweight profile – keeps your setup efficient and agile ✅ Excellent feedback – for powerful pumping and intuitive turns ✅ Seamless compatibility – fits a range of fuselage and front wing options Who Is It For? The Committed Downwind Foiler If you’re spending more time chasing bumps than on the beach, this stabilizer is for you. It helps maximize glide time, conserve energy during long runs, and maintain control when it matters most. Additionally, its stiffness improves tracking on angled water or when changing speeds, making it a perfect choice for those pushing their limits. Multi-Discipline Riders Do you split your time between wings, SUPs, and prone boards? Then you’ll love how the STAB DW  HM adapts. Because of its low-profile and high-efficiency shape, you won’t need to swap components between sessions to get elite-level performance. Take Control of Your Foiling Progression Ultimately, the STAB DW  HM isn’t just an accessory—it’s a performance upgrade. It brings pinpoint control, efficient lift, and unmatched glide to your sessions. Once you bolt it on, you’ll feel the difference in every pump, turn, and glide. So, if you’re ready to level up your foil game and tap into effortless speed, now’s the time to trust your gear. Ride with the STAB DW 210 HM—and feel the glide take over. Surface: 210 cm² Span: 43 cm AspectRatio: 8.8 Weight: 0.13 kg

    Add to cartDone
  • STAB IC6 300

    STAB IC6 300

    €70.00

    STAB IC6 300 – A Fusion of Stability, Control, and Accessibility Unlock Smooth, Progressive Foiling With Confidence If you’re chasing consistent performance, intuitive handling, and smooth gliding, the STAB IC6 300 is the stabilizer you’ve been waiting for. Designed by F-ONE, this tail wing harmonizes with a variety of front foils to offer one of the most accessible and well-balanced foil experiences available today. Whether you’re just starting or pushing into advanced maneuvers, the STAB IC6 300 adapts with you, not against you. Its IC6 (Injected Carbon 6) construction brings together the best of both worlds: the stiffness and responsiveness of carbon with the durability and affordability of composite materials. For anyone wanting confidence under their feet, stability in turns, and enhanced control during transitions—this stabilizer sets a new benchmark. Why the STAB IC6 300 Stands Out Optimized for a Wide Range of Riders First and foremost, the STAB IC6 300 was engineered to provide exceptional balance and control for beginners and progressing intermediates. However, its capabilities are far from basic. As your riding evolves, this stabilizer continues to deliver the performance you need, whether you’re pumping, carving, winging, or even dock-starting. STAB IC6 300 Efficient Glide Without Sacrificing Stability Secondly, its medium aspect ratio and moderate surface area allow you to enjoy long, efficient glides without compromising stability. You’ll notice how it encourages you to ride longer lines and feel more in tune with the foil beneath you. STAB IC6 300 Tuned for Versatile Use Across Disciplines Thirdly, this rear wing isn’t confined to just one foiling discipline. Whether you’re into wing foiling, kite foiling, or even SUP foiling, the STAB IC6 300 is your trusted companion across all sessions. It allows you to flow seamlessly between activities while maintaining consistency in feedback and feel. Key Benefits of the STAB IC6 300 Balanced Performance With Zero Compromise Incredible Stability – Enjoy a smooth, secure feeling in straight lines and while initiating carves or transitions. Predictable Handling – Designed to give you confidence in your movements, especially during jibes and foot changes. Efficient Glide – Offers prolonged gliding capabilities, allowing you to ride longer, farther, and with less effort. User-Friendly Design – Especially ideal for progressing riders looking for a reliable and adaptable rear wing. Durable Construction – Built using Injected Carbon (IC6), which blends strength, flexibility, and longevity. Construction Excellence: What Is IC6? A Revolutionary Material for Everyday Performance IC6 stands for Injected Carbon 6, a material innovation developed by F-ONE that reinvents carbon construction for foiling gear. While traditional carbon wings offer stiffness and lightweight, they’re often brittle and expensive. On the contrary, IC6 brings a high modulus core encased in tough, injected polymer, giving it the strength you expect and the durability you need for regular use. This combination allows for: Enhanced impact resistance, especially valuable for beginners. Cost-effective access to high-performance foiling components. Longer product life, even under intense use across various conditions. Additionally, the IC6 300’s precision-molded geometry ensures that each stabilizer offers identical performance characteristics, giving you consistent behavior across units and replacement parts. Detailed Specifications Specification Value Construction IC6 (Injected Carbon 6) Surface Area 300 cm² Aspect Ratio Medium Wingspan ~42 cm (approximate) Weight ~300g Compatibility Works with F-ONE fuselages Usage Wing, SUP, Kite, Wake Foiling Perfectly Matched with F-ONE Foils Modular, Seamless Compatibility The STAB IC6 300 integrates effortlessly into the F-ONE foil ecosystem. Designed to pair perfectly with fuselages and front wings from the brand’s modular lineup, this stabilizer ensures: Tool-free adjustments, thanks to its precision-molded mounting system. Seamless tuning, allowing riders to customize their foil setup for pumping, carving, or speed. Effortless upgrades, making it simple to transition from beginner to advanced setups. Moreover, its geometry complements many front wings, particularly those in the Gravity, Phantom, and Escape lines. STAB IC6 300 Use Cases Across Disciplines Wing Foiling When winging, the STAB IC6 300 offers a rock-solid rear base, making transitions, tacks, and pumping smoother. Its controlled lift distribution enhances your low-speed balance, which is ideal for light-wind sessions. SUP and Surf Foiling This stabilizer shines in small to medium wave conditions. By providing just enough rear-end support without excessive drag, it enables playful carves and fluid turns, helping surfers stay in the pocket longer. Kite Foiling Due to its lightweight and compact form, kite foilers benefit from increased responsiveness and minimal drag. Whether you’re free-riding or chasing long-distance sessions, this tail wing keeps your ride efficient and predictable. Wake and Pump Foiling For dock starts and pump foil riding, the IC6 300 provides consistent rebound and rhythm. Even smaller riders find it easier to maintain lift without having to over-pump, reducing fatigue and maximizing session time. In the Box: Everything You Need to Ride When you order the STAB IC6 300, you receive more than just a rear wing. The package includes: STAB IC6 300 Stabilizer Protective padded cover Mounting screws (standardized sizing) User manual and tuning tips Each item is packaged with sustainability in mind using recyclable and reusable materials, because caring for the ocean starts with conscious design choices. Sustainability and Durability Combined F-ONE understands the importance of environmentally mindful construction. The IC6 300 doesn’t just offer performance; it also reflects a step toward sustainability: Longer lifespan = fewer replacements Recyclable packaging materials Low-waste production methods In addition, the wing’s durability reduces your total environmental impact by minimizing broken gear, returns, and unnecessary replacements. STAB IC6 300 Ideal Rider Profile You’ll love the STAB IC6 300 if you are: New to foiling and want a stabilizer that accelerates your learning curve. Progressing steadily, seeking more control and less wobble at higher speeds. Cross-disciplinary, foiling across kite, wing, SUP, and pump disciplines. Concerned with gear durability, but unwilling to compromise performance. Looking to match modular setups without committing to carbon pricing. STAB IC6 300 Tuning Tips for Maximum Enjoyment Fine-tuning your rear wing setup can dramatically change your experience. Here are quick tuning suggestions: Pitch Sensitivity: Move the stab slightly forward for quicker turns; backward for more…

    Add to cartDone